EPHESUS KNX Room controllers have a stylish and simple design produced from zinc alloy. The dyeing process was done with its unique craftsmanship. Our devices, which are produced in two models with two and four buttons, can be easily mounted to the universal round or square plaster cases.
At first sight, it is perceived as a KNX based thermostat controller. However, it is not only a thermostat, but also a KNX based room controller. The EPHESUS KNX Room Controller features a simple interface design with temperature, humidity and ambient light sensors. This ensures a high level of comfort and energy efficiency in your environment. With a single touch you can comfortably control air conditioning, lighting, curtains / blinds, activate / deactivate sound systems or scenario management.
Thus, a single platform allows you to control the most important functions needed in the room. In addition, all functions can be controlled remotely via the EOZ Touch Panel, smartphone or tablet (iOS & android).
Main Technical Specifications:
- LCD touch button
- Zamak material finishing
- Handmade dyeing
- Air conditioning by Temperature / Humidity sensor
- Ambient lighting sensor
- 3 different color variations of status lighting
EPHESUS KNX Room Controller – 2 Gang
The EPHESUS 2 Gang KNX Room Controller Thermostat with capacitive touch screen can be used for switching, dimming, shutter and blind control. HVAC functionalities such as cooling and heating or fan coil control are supported. EPHESUS KNX Room Controller displays the values from the embedded temperature and humidity sensor on the LCD. Additionally, embedded ambient sensor and light sensor can be added. All parameters can be changed using ETS and send periodically to the KNX Bus.
EPHESUS KNX Room Controller – 4 Gang
The I-Luxus 4 Gang KNX Thermostat with capacitive touch screen can be used for switching, dimming, shutter and blind control. HVAC functionalities such as cooling and heating or fan coil control are supported. Values from the embedded temperature and humidity sensor are displayed on the LCD screen. Additionally, embedded ambient sensor and light sensor can be added. All parameters can be changed using ETS and send periodically to the KNX Bus.
