The KNX DALI Plus 2098 REGHE gateway is the interface between a KNX installation and a DALI digital lighting system. It allows room lighting control of e.g. open-plan offices, classrooms, production halls, meeting rooms, showrooms, or shop windows to be included in the higher-level KNX building management system.
In addition to switching and dimming 64 lights in a maximum of 32 light groups, 16 pre-programmed lighting scenes may be stored and retrieved. Moreover, the gateway provides actual light control which allows lights or light groups to be included in dynamic light moods. This allows brightness scenarios to be implemented across one or more DALI groups or single DALI units or scenes.
Furthermore, the JUNG KNX DALI Plus gateway may be included in DALI emergency lighting systems. The gateway is capable of incorporating DALI lighting control standard operating units according to IEC 62386-101 (DALI) and IEC 62386-102 (control gear) as emergency light in centrally powered emergency lighting systems.
Simplified on-line and off-line planning is another advantage. This is beneficial when e.g. the gateway is configured before DALI system start-up. The DALI gateway is configured and put into operation through a plug-in embedded in ETS. No additional hardware or software is required.
