Enertex KNX IP Secure Router – available now¹
Enertex® Bayern GmbH redefines the reference class in this product line with the world’s first KNXA-certified KNX IP Secure Router.
The device has the following functions:
KNX IP Secure²
Eight independent KNXnet / IP tunnel connections
Communication via TCP or UDP KNX IP routing for communication between KNX lines, areas and systems
KNX IP routing in encrypted (secure) mode.
KNX IP tunneling in encrypted (secure) mode.
Telegram forwarding and filtering according to physical address
Telegram forwarding and filtering according to group address with up to 62 filter blocks
Displays
LED displays for KNX communication, Ethernet communication and programming mode
Power indicator
OLED display for status messages, parameter displays etc.
Special functions
Configuration via ETS and Telnet
SNTP server
Measurement of the TP bus voltage (Telnet, OLED display)
Maximum TP APDU packet length of the KNX bus (248 bytes)
Maximum TP packet length adjustable (Telnet) between 55 and 248 bytes (APDU)
Simulation of UDP tunnels for ETS communication (Telnet)
Performance
Specification of a max. TP data rate for writing KNX telegrams
Buffering up to 256 telegrams per tunnel (2048 in total) in the device on the IP side
Buffering up to 1024 telegrams for telegrams from IP to TP
Notes
¹ Because we expect a high order rate: Only while stocks last.
² Secure functions need ETS5.7, plain mode minimum requirement is ETS5.6.6
