The Universal KNX Actuator System is a fully modular actuator system where extension modules can be plugged-in to extend the number of channels as needed. Up to 72 channels can be combined for switching, shutter or blind, heating, dimming, analog 0-10V or LED drivers with various size and power.
Modular & Extensible
The Universal KNX Actuator System is a fully modular actuator system where extension modules can be plugged-in to extend the number of output channels as needed. Up to 72 channels and more than 10 types of extensions can be used with various size and power.
Extension modules can be plugged-in next to the master module to add extra channels or functions to fit exactly to the project needs.
Rich Features
With a feature-rich application, each channel can be individually configured to control :
- Lights and sockets
- Shutters or Blinds
- Automatic lighting or pulses
- Heating valves
- 0-10V analog devices
- LEDs and LED strips
- External contactors
- Power measurement
Fast connections
Optional bridging bars allow to limit wired connections, greatly facilitating the installation work. In addition, each channel of the 16A extensions is equipped with double connection terminals to facilitate bridging and control of multiple loads.
Easy startup
Each module is equipped with signalling LEDs. The controls (4 pushbuttons) on the front panel of the master device permit switching the relays on and off by hand in parallel with the KNX bus, even without bus voltage or in a non-programmed state. This feature permits fast checking of connected loads for proper functioning.
