The e-magazine for KNX home & building control

JUNG Introduces New 4-Gang KNX LED Universal Dimming Actuator

Consciously put rooms into their best light

The new JUNG KNX dimming actuator forms the interface between the bus system and the lighting. The actuator impresses with its high functionality in a compact design. It requires a particularly small space and working with KNX Data Secure is future-proof.

The new KNX LED universal dimming actuator, 4-gang has numerous advantages: these include eight logics, converters, comparators and filter and time functions. Furthermore, it has optimised and adjustable dimming characteristic curves in the time and value areas. In addition, the dimmer is smaller than its predecessors.

Thanks to KNX Data Secure and update capability via the ETS Service app, the dimming actuator is future-proof: If an update is available, installers can carry it out using the JUNG ETS Service app. The communication is secure thanks to KNX Data Secure and the transmissions are protected from manipulation.

Half as wide but twice as good: the advantages of the JUNG KNX LED universal dimming actuator, 4-gang

The new dimming actuator has numerous advantages: These include eight logics, converters, comparators as well as filter and time functions. It also has optimised and adjustable dimming characteristics in the time and value range. The dimmer is also smaller than its predecessor. This results in clear cost advantages for both the installer and the building owner. Thanks to KNX Data Secure and the update capability using the ETS Service App, the dimming actuator is future-proof. If an update is available, installers can perform this via the JUNG ETS Service App. Communication is secure thanks to KNX Data Secure and transmissions are protected against manipulation.

  • Reduced width
    The width of the new dimming actuator has been halved to only 4 TE. That effectively saves space in the distributor.
  • Single height design
    Due to the single height design, wiring is more convenient and clearer.
  • Integrated logic functions
    Logics can be set up decentrally and without a configurator.
  • Minimal load for HV-LED = 1W
    Thanks to the reduced minimum load, users can choose from a wide range of compatible and dimmable luminaires.

www.jung.de/en

Share on facebook
Share
Share on twitter
Tweet
Share on linkedin
Share

SPONSORS

The new PEAKnx Control 12


The new PEAKnx Control 12
The 11.6-inch smart home panel by PEAKnx represents a significant advancement as the successor to the Controlmini. Among ...

LUXA 103 KNX presence detectors


LUXA 103 KNX presence detectors
Theben is expanding its LUXA 103 presence detector series for indoor and outdoor lighting and HVAC control with a KNX ...

Interra iX3 4” Touch Panel


Interra iX3 4” Touch Panel
A next-generation room controller that transforms environmental management. With integrated sensors for temperature, humidity, brightness, and air quality (optional ...